Walro Flex manufactures domestic and industrial electrical cabling which is used for the wiring of all types of control panels, buildings, factories, etc. Our range includes general purpose house wire which is mainly used by electrical contractors, electricians, municipalities and all major switchboard manufacturers.
Range of Products
- Cabtyre
- Pigtail
- Rip Cord
- Surfix
- Flat Twin & Earth
- Welding Cable
- General Product Information
- Packaging Information
High conductivity bunched plain flexible copper conductors to SANS 1411 Part 1. Insulated and colour coded with general purpose
flexible grade PVC to SANS 1411 Part 2. Cores are twisted together and sheathed with a flexible grade PVC.
Download Product Information sheet
This cable that has an appropriate connector on one end and loose wires on the other. It is designed to patch into an existing line or to terminate the ends of a long run.
Download Product Information sheet
Walro Flex manufactures flexible plain copper conductors which are PVC insulated.
Download Product Information sheet
This cable consists of copper conductors to SANS 1411 Part 1, PVC insulated to SANS 1411 Part 2 , laid up with a bare tinned copper earth wire in contact with a longitudinal aluminium/polyethylene laminate, UV stable PVC sheathed to SANS 1411 Part 2.
Download Product Information sheet
This cable contains copper conductors to SANS 1411-1, PVC insulated to SANS 1411-2, laid up with a bare copper earth conductor between them, UV stable PVC sheathed to SANS 1411-2.
Download Product Information sheet
This cable contains single core flexible copper conductors to SANS 1411-Part 1, EPM (Ethylene-propylene monomer) insulated, CM (Chloronated Polyethylene) or CR (Polychloropene) sheathed, heavy duty welding cables.
Download Product Information sheet
Information on all electrical cabling products
Download Product Information sheet
Auto Wire
Walro Flex Small Spool Packaging
Pallet size is 1170x1170mm. Pallets are marked numerically. Small spools are stacked on the pallet in layers of 9 spools. Spools do not overlap on a pallet. According to customer requirements 3, 4, or 5 layers are stacked on each pallet. Each pallet has a bale board and is shrink-wrapped and strapped with steel Strapping.
Walro Flex Large Spool Packaging
Pallet size is 920x1350mm. Pallets are marked numerically. Large spools are stacked on the pallet in layers of 6 spools, either 2 or 3 high, depending on customer requirements. Spools do not overlap on a pallet. Each pallet has a bale board and is shrink-wrapped and strapped with steel strapping.
Battery Cable
Packaging
Battery cable pallet size is 1090x1500mm. Pallets are marked numerically. This pallet holds 4 drums. Drums do not overlap on a pallet. The product on individual drums is shrink wrapped. The drums are covered with cardboard to protect the products. The 4 drums are strapped with steel strapping.
Dispatch Inspection
Each pallet undergoes full inspection on the quality of the pallet, spools, spools/drums, shrink-wrap and strapping before being dispatched.
Documentation
- Each pallet is identified with a hand-written label to identify the customer
- Consignment notes are raised per pallet and checked for accuracy
- Invoices are printed per pallet
- Stores controller and transport operator verify quantities of spools and pallets before loading
Consignment notes are split as follows:
- White – Walro Flex
- Yellow – Customer
- Blue – Transport Operators
- Consignment notes, with corresponding copies of invoices (marked POD), are attached to the respective pallets by means of a plastic envelope.
- All invoices covering the total consignment, are contained in an envelope and attached to pallet no. 1
- The white consignment note, together with Walro Flex POD, must be returned to Walro Flex after it is signed by the customer, as proof of delivery
Address
61 7th Avenue
Alberton North, Gauteng
South Africa
Phone
+27 (11) 907-1563
Telefax
+27 (11) 907-7903
sales@walroflex.com